Suitable for the production and packaging of transparent crafts such as amber.
1. Our company specializes in producing all kinds of walnut glue, fake water glue, amber glue, sanding glue, fake gemstone glue, soft and hard curved surface glue, scribing glue, cinnabar glue and so on.
2. Personalized product characteristics can be customized according to customer requirements. Online or inquiries are welcome. Professional consultants and technical engineers will answer and customize products that meet your needs.
Type |
Model |
Color |
Weight Ratio |
Mixed Viscosity |
Curing Time |
Hardness |
Product Characteristics |
Quick-drying walnut Glub |
1060AB |
creamy white |
2:1 |
/ |
25°C X 20G X 2-3h |
≥75D |
Fast curing time, good toughness, high hardness |
Slow-drying walnut Glub |
1006AB-6 |
creamy white |
4:1 |
/ |
25°C X 20G X 5-7h |
≥75D |
Moderate curing time, high hardness |
Simulation water glue |
5000AB-29 |
Clear |
3:1 |
250-350 |
25°C X 20G X 10-14h |
≥80D |
Small heat release, no bubbles, high transparency |
Artificial amber glue |
5000AB-30 |
Clear |
3:1 |
300-400 |
25°C X 20G X 10-14h |
≥80D |
High transparency, high hardness, no bubbles |
High hardness sanding glue |
5008AB-1 |
Clear |
1:1 |
200-300 |
90°C X 2-3h+130°CX2-3h |
≥95D |
Can be polished, the light transmittance is close to glass |
Fake gem glue |
5008AB |
Clear |
3:1 |
500-600 |
25°C X 20G X 10-14h |
≥80D |
High transparency and high hardness |
High-end resin glue |
5008AB-1 |
Clear |
1:1 |
200-300 |
90°C X 2-3h+130°CX2-3h |
≥95D |
High transparency, high hardness, good yellowing resistance |
High-end resin handicraft glue |
5008AB-2 |
Clear |
1:1 |
200-300 |
90°C X 2-3h+130°CX2-4h |
≥95D |
High transparency, high hardness, small shrinkage |
Soft curved surface glue |
5950AB |
Clear |
3:1 |
/ |
25°C X 20G X 8-10h |
≥65A |
High curvature, good adhesion, good softness |
Hardness curved surface glue |
5903AB |
Clear |
3:1 |
/ |
25°C X 20G X 8-10h |
≥80D |
High curvature and high hardness |
Transparent marking glue |
5230AB |
Clear |
3:1 |
600-700 |
25°C X 20G X 4-4h |
≥80D |
Adhesion, the lines are full and do not collapse |
White marking glue |
5700AB |
White |
1:1 |
4000-5000 |
25°C X 20G X 8-10h |
≥80D |
Full lines, high hardness, good gloss |
Quick-drying cinnabar handicraft glue |
5100AB-1 |
Clear |
2:1 |
300-350 |
25°C X 20G X 2-3h |
≥80D |
High hardness, no bubbles, long operation time |
Slow-drying cinnabar handicraft glue |
5100AB |
Clear |
3:1 |
400-450 |
25°C X 20G X 4-5h |
≥80D |
Fast curing, high hardness, low viscosity |
Application Method:
1. Clean up the glue product, remove water, dust, oil and other impurities, and place it ready for potting.
2. Mix and mix the AB glue according to the mass ratio.
3. Pack the glued water in the container of the glue bottle or other container, and quickly fill the glue into the part of the product that needs to be glued.
4, after filling the glue, it can be cured at room temperature, and clean the tool.
Package Storage:
1. Packed for each group of 30KG, A glue 25KG / pot, B glue 5KG / pot
2. After the plastic bucket is opened and the glue is poured out, it needs to be covered immediately to avoid contact with the air for a long time, which causes the glue to oxidize and crystallize.
3, the glue must be sealed and stored in a cool and ventilated place to avoid high temperature or sun exposure
4. The glue may crystallize in the low temperature condition in winter, and it needs to be dissolved in a 60 degree oven before use.
5. The shelf life of this glue is 6 months. If the shelf life is exceeded, please try it in small amount. If it is qualified, you can continue to use it.