Simulation water glue
Fake water epoxy resin for simulation water, floral simulation water glub, high transparent high hardness, artificial flower
Product Description:
Simulation water glue, high hardness, high transparency.
Selected imported high-quality raw materials, stable quality.
Hardness after curing is Shore 82D
The surface is smooth and bright, no bubbles, yellowing resistance, low viscosity, adjustable color, good defoaming, strong adhesion
Scope of Application
Suitable for all kinds of 3D resin painting, simulation water, fake water, specimens, etc.
Product Parameters:
| Model | 5000AB-29 |
 |
| Color | Transparent liquid | |
| Mixed Viscosity | 300-350cps | |
| Weight Ratio | A:B=3:1 | |
| Use Time | 25°C X 20G X 60-90Mins | |
| Curing Time | 25°C X 20G X 10-14h | |
| Hardness | ≥82D | |
| Shelf Life | 6 months |
Product Certification:
EU ROHS Environmental Certification MSDS Export Safety Data Sheet
Application Method:
1. Prepare electronic scales and glue tools.
2. Pour A and B into the rubber mixing container according to the weight ratio and stir them evenly. If there are bubbles, please vacuum.
3. Pour the stirred glue into the product and cure at room temperature.
Precautions:
1. Please clearly check the label on the package before matching the glue, and confirm the ratio of the ratio of the A agent to the B agent.
2, the glue tool should be clean and dry, no dust, water and oil
3. Mix the A and B components according to the proportion and stir evenly to avoid unevenness or lack of hardness.
4. Since the glue starts to react and heat, the more the amount of glue is, the more heat is generated, and the curing time is also shortened. The shorter the time that can be used, so please apply the proper amount of glue according to the time of filling. So as not to cause waste.
5. After the glue is finished, seal the AB agent package to prevent debris or moisture absorption, and ensure the normal use of the next time.
6, a very small number of people exposed to the glue for a long time will produce mild skin allergies, it is recommended to wear protective gloves when used, stick to the skin can be wiped off with acetone, Tianna water or alcohol, and cleaned with detergent
7, before mass use, please try a small amount, master the use of the product skills, so as not to make mistakes
Package Storage:
1. Packed for each group of 30KG, A glue 20KG / pot, B glue 10KG / pot
2. After the plastic bucket is opened and the glue is poured out, it needs to be covered immediately to avoid contact with the air for a long time, which causes the glue to oxidize and crystallize.
3, the glue must be sealed and stored in a cool and ventilated place to avoid high temperature or sun exposure
4. The glue may crystallize in the low temperature condition in winter, and it needs to be dissolved in a 60 degree oven before use.
5. The shelf life of this glue is 6 months. If the shelf life is exceeded, please try it in small amount. If it is qualified, you can continue to use it.
PREVIOUS:High arc crystal glue, epoxy arc ab glue, high hardness and polishable
NEXT:no article
