INDUSTRY APPLICATION

Porcelain crystal glue

Self-leveling crystal glue, photo frame album porcelain crystal epoxy, high hardness and transparent
Product Description
Porcelain crystal glue, high hardness, transparent.
Selected imported high quality raw materials, stable quality
Hardness after curing is Shore 82D
No ripple on the surface, good gloss and yellowing resistance.
Low viscosity, self-leveling, water and oil proof, anti-aging, strong adhesion.
Scope of Application
Applicable to all kinds of photos, countertops, wall decoration paintings, decorative panels and other surface approval.


Product Parameters:
Model 5000AB-23
Color Transparent liquid
Mixed Viscosity 300-350cps
Weight Ratio A:B=3:1
Use Time 25°C X 20G X 20-30Mins
Curing Time 25°C X 20G X 7-9h
Hardness ≥82D
Shelf Life 6 months

Product Certification:
EU ROHS Environmental Certification MSDS Export Safety Data Sheet

Application Method:
1. Prepare electronic scales and glue tools, and level the table.
2. Pour A and B into the rubber mixing container according to the weight ratio and stir them evenly. If there are bubbles, please vacuum.
3. Drip the evenly mixed glue directly on the product and let it solidify naturally

Precautions:
1. Please clearly check the label on the package before matching the glue, and confirm the ratio of the ratio of the A agent to the B agent.
2, the glue tool should be clean and dry, no dust, water and oil
3. Mix the A and B components according to the proportion and stir evenly to avoid unevenness or lack of hardness.
4. Since the glue starts to react and heat, the more the amount of glue is, the more heat is generated, and the curing time is also shortened. The shorter the time that can be used, so please apply the proper amount of glue according to the time of filling. So as not to cause waste.
5. After the glue is finished, seal the AB agent package to prevent debris or moisture absorption, and ensure the normal use of the next time.
6, a very small number of people exposed to the glue for a long time will produce mild skin allergies, it is recommended to wear protective gloves when used, stick to the skin can be wiped off with acetone, Tianna water or alcohol, and cleaned with detergent
7, before mass use, please try a small amount, master the use of the product skills, so as not to make mistakes

Package Storage:
1. Packed for each group of 30KG, A glue 20KG / pot, B glue 10KG / pot
2. After the plastic bucket is opened and the glue is poured out, it needs to be covered immediately to avoid contact with the air for a long time, which causes the glue to oxidize and crystallize.
3, the glue must be sealed and stored in a cool and ventilated place to avoid high temperature or sun exposure
4. The glue may crystallize in the low temperature condition in winter, and it needs to be dissolved in a 60 degree oven before use.
5. The shelf life of this glue is 6 months. If the shelf life is exceeded, please try it in small amount. If it is qualified, you can continue to use it.
 

Inquiry

Copyright @ Tianjin Kaida Science And Technology Co., Ltd. All Rights Reserved