1. Waterproof plastic steel pulp is a two-component reactive high-strength structural bonding repairing material, which is toothpaste-like before curing.

2. It can flow after mixing. It is bright like a enamel after solidification. It is as hard as stone, strong in structure, wear-resistant, acid and alkali resistant, corrosion resistant, high/low temperature resistant, no shrinkage, no aging, no deterioration, no toxicity. Waterproof, mildew proof, moisture proof,
high strength adhesion and tough structural strength

3. Waterproof plastic steel pulp passes the EU ROHS environmental protection designation standard.

4. KAIDA specializing in the production of a variety of ceramic plastic steel pulp, can be customized according to requirements.

Ceramic repair adhesive application range:

Suitable for waterproofing and fixing of toilets, basins, bathtubs and corners of hotels, hotels, homes, etc. (More applications, please contact us)

Ceramic repair adhesive product series

1. Our company specializes in producing all kinds of ceramic repair glue, ceramic adhesive glue, transparent ceramic glue, white earth color plastic steel pulp and so on.

2, according to customer requirements, customized product features, welcome online or call us, there will be professional consultants and technical engineers to answer and customize the products for your needs.

Product Parameters:

Model:	1009A-1	1009B-1
Color:	white viscous body	transparency viscous body
Viscosity:	/	12000-15000cps
Specific:	1.2g/cm3	1.1g/cm3
Shelf life:	6 months	6 months
Ratio:	A: B = 1: 1 (weight ratio)
Use time:	25 ° C × 20g × 20-30minutes
Gel time:	25 ° C × 20g × 1.5-2.5hous
Curing time:	25 ° C × 20g × 3-4hous
Hardness time:	SHORE D≥75

Ceramic bonding glue sizing method

1. Clean the construction surface to remove impurities such as dust and oil.

2, the AB mixed plastic steel scrape is applied to the repairing area, slightly pressure, when the surface needs to be smooth, it can be dampened with water or alcohol. When high strength is required, it can be wrapped with tape on the outside. This product cures at 25 degrees normal temperature for 3 hours and reaches maximum strength at 24 hours.

Instructions for use

1. Please clearly check the label on the package before matching the glue, and confirm the ratio of the ratio of the A agent to the B agent.

2, the glue tool should be clean and dry, no dust, water and oil

3. Mix the A and B components according to the proportion and stir evenly to avoid unevenness or lack of hardness.

4. Since the glue starts to react and heat, the more the amount of glue is, the more heat is generated, and the curing time will be shortened. The shorter the time that can be used, so please apply the proper amount of glue according to the time of filling. So as not to cause waste.

5. After the glue is finished, seal the AB agent package to prevent debris or moisture absorption, and ensure the normal use of the next time.

6, a very small number of people exposed to glue for a long time will produce mild skin allergies, it is recommended to wear protective gloves when used, stick to the skin can be wiped off with acetone, Tianna water or alcohol, and cleaned with detergent;

7, before mass use, please try a small amount, master the use of the product skills, so as not to make mistakes