INDUSTRY APPLICATION

Ink art floor resin

Ink art floor resin, art floor resin, high hardness and transparent
Product Description
Ink art resin,high hardness,transparent.
Selected imported high-quality raw materials,stable quality.
The hardness after curing is 82D Shore.

No ripples on the surface,no bubbles,yellowing resistance.
Low viscosity,self-leveling,waterproof and oil resistant,
Non-slip,good gloss,aging resistance,strong adhesion.

Scope of application
Suitable for all kinds of artistic floors,ink floors,etc.


Product Parameters:
Model 5302AB-8
Color colorless Transparent liquid
Mixed Viscosity 300-350cps
Weight Ratio A:B=3:1
Use Time 25°C X 20G X 60-90Mins
Curing Time 25°C X 20G X 10-14h
Hardness ≥82D
Shelf Life 6 months

Product Certification:
EU ROHS Environmental Certification MSDS Export Safety Data Sheet

Application Method:
1. Prepare electronic scales and dispensing tools
2.Put A and B into the mixing container according to the weight ratio and stir well.
3. Pour the agitated glue directly on the ground, use a scraper to smooth the unevenness, and wait for natural curing after finishing

Precautions:
1. Please clearly check the label on the package before matching the glue, and confirm the ratio of the ratio of the A agent to the B agent.
2, the glue tool should be clean and dry, no dust, water and oil
3. Mix the A and B components according to the proportion and stir evenly to avoid unevenness or lack of hardness.
4. Since the glue starts to react and heat, the more the amount of glue is, the more heat is generated, and the curing time is also shortened. The shorter the time that can be used, so please apply the proper amount of glue according to the time of filling. So as not to cause waste.
5. After the glue is finished, seal the AB agent package to prevent debris or moisture absorption, and ensure the normal use of the next time.
6, a very small number of people exposed to the glue for a long time will produce mild skin allergies, it is recommended to wear protective gloves when used, stick to the skin can be wiped off with acetone, Tianna water or alcohol, and cleaned with detergent
7, before mass use, please try a small amount, master the use of the product skills, so as not to make mistakes

Package Storage:
1. Packed for each group of 30KG, A glue 25KG / pot, B glue 5KG / pot
2. After the plastic bucket is opened and the glue is poured out, it needs to be covered immediately to avoid contact with the air for a long time, which causes the glue to oxidize and crystallize.
3, the glue must be sealed and stored in a cool and ventilated place to avoid high temperature or sun exposure
4. The glue may crystallize in the low temperature condition in winter, and it needs to be dissolved in a 60 degree oven before use.
5. The shelf life of this glue is 6 months. If the shelf life is exceeded, please try it in small amount. If it is qualified, you can continue to use it.
 

Inquiry

Copyright @ Tianjin Kaida Science And Technology Co., Ltd. All Rights Reserved