10cm thick imported resin
Imported wood transparent resin River table crystal casting glue
The wood resin table you made is always thrown away?
The wood resin table you made always bursts and cracks?
The wood resin table you made is always blurry and opaque?
Product Description
Imported transparent resin, can be poured 10 cm thick in a single time
High hardness, glass transparent, no fog
Selected imported raw materials, stable quality
Single pouring 10 cm thick, will not burst
After curing, the glass is transparent and does not fog
Hardness can reach Shaw 82D, can't be scratched by a fingernail.
Wood resin bonding is not easy to crack
In a low-viscosity formulation, the resin penetrates into every tiny pore in the wood, allowing the wood to blend into the resin. Plus the strong adhesion and adhesion of the resin to the surface of the wood, so it is not easy to crack
Long yellowing resistance, can be polished to mirror
Ordinary transparent resin, indoors generally resistant to yellowing for less than one year
Imported transparent resin, indoor yellowing resistance for two or three years
Using a new professional polishing process,
Polished particles attached to the surface of the resin
Just like filling every tiny hole, it shines like a mirror
Scope of Application
The transparent resin can be added with sandstone,dried flowers,pearl powder and color essence.
Suitable for wood table pouring,wood furniture crafts pouring,resin wood piers,stone countertops,resin flower lights,etc.
All kinds of products require high hardness,glass transparent and other products.
Product Certification:
EU ROHS Environmental Certification MSDS Export Safety Data Sheet
Application Method:
Product Parameters:
| Model | 5301AB-8 |
 |
| Color | Transparent liquid | |
| Mixed Viscosity | 250-350cps | |
| Weight Ratio | / | |
| Use Time | / | |
| Curing Time | / | |
| Hardness | ≥82D | |
| Shelf Life | 6 months |
Product Certification:
EU ROHS Environmental Certification MSDS Export Safety Data Sheet
Application Method:
1. Prepare the electronic scale and the glue tool to clean the products that need to be glued.
2. Pour A and B into the plastic container according to the weight ratio and stir evenly.
3. Put the stirred glue into the glue bottle, and then quickly fill it into the product that needs to be glued.
4, after filling the glue, it can be cured at room temperature, and clean the tool
Precautions:
1. Please clearly check the label on the package before matching the glue, and confirm the ratio of the ratio of the A agent to the B agent.
2, the glue tool should be clean and dry, no dust, water and oil
3. Mix the A and B components according to the proportion and stir evenly to avoid unevenness or lack of hardness.
4. Since the glue starts to react and heat, the more the amount of glue is, the more heat is generated, and the curing time is also shortened. The shorter the time that can be used, so please apply the proper amount of glue according to the time of filling. So as not to cause waste.
5. After the glue is finished, seal the AB agent package to prevent debris or moisture absorption, and ensure the normal use of the next time.
6, a very small number of people exposed to the glue for a long time will produce mild skin allergies, it is recommended to wear protective gloves when used, stick to the skin can be wiped off with acetone, Tianna water or alcohol, and cleaned with detergent
7, before mass use, please try a small amount, master the use of the product skills, so as not to make mistakes
Package Storage:
1. Packed for each group of 30KG, A glue 25KG / pot, B glue 5KG / pot
2. After the plastic bucket is opened and the glue is poured out, it needs to be covered immediately to avoid contact with the air for a long time, which causes the glue to oxidize and crystallize.
3, the glue must be sealed and stored in a cool and ventilated place to avoid high temperature or sun exposure
4. The glue may crystallize in the low temperature condition in winter, and it needs to be dissolved in a 60 degree oven before use.
5. The shelf life of this glue is 6 months. If the shelf life is exceeded, please try it in small amount. If it is qualified, you can continue to use it.
PREVIOUS:High hardness transparent river table crystal pouring glue
NEXT:Wooden table top resin glue, crystal table top glue, high hardness transparent, no ripple
