Tile sealer construction method 1

tool

Glass hose, glass glue gun, textured paper, scraper, blade

Method step

1. Clean the construction surface to remove dust, oil and other impurities.

2. Take equal amounts of A and B components and mix them evenly according to the ratio of 1: 1, then fill them in an empty glass plastic cylinder, which can be applied with a glue gun like glass glue, which is simple and convenient. If you are not skilled, you can paste textured paper on both sides of the gap to make a beautiful straight line. Rip off the textured paper after scraping it with a scraper.

3. If it is a self-leveling tile sealer, just let it level naturally.

Tile sealer construction method 2

tool

PP plastic bag, scraper, spatula, embossed steel ball

Method step

1. Clean the construction surface to remove dust, oil and other impurities.

2. Take equal amounts of A and B components and mix them evenly according to the ratio of 1: 1, then put them in a PP bag, then cut out a small hole, and slowly squeeze it out directly along the gap. The operation is simple and convenient. Then roll it over with a seam steel ball. After the tile sealer has cured naturally, use a spatula to directly shovel off the extra scrap.

3. If it is a self-leveling tile sealer, just let it level naturally.

Precautions

1. The tile sealer should be peeled off immediately after scraping.

2. In the process of beautiful seam construction, the tile sealer must be used as much as necessary, otherwise AB will solidify quickly.