High hardness polishing glub
Stone polishing glue, high hardness and transparent, artificial marble countertop surface polishing glue
Product Description:
High hardness polishing glub, high hardness, high transparency.
Selected imported high-quality raw materials, stable quality.
Hardness after curing is Shore 88D
Can be polished, acid and alkali resistant, heat and humidity resistant, low viscosity, good penetration, corrosion resistance, aging resistance, heat and humidity resistance, strong adhesion
Scope of Application
Applicable to various stone countertops, wooden countertops, handicrafts and other surface finishes
Product Parameters:
| Model | 5600AB |
 |
| Color | Transparent liquid | |
| Mixed Viscosity | 400-500cps | |
| Weight Ratio | A:B=4:1 | |
| Use Time | 25°C X 20G X 15-20Mins | |
| Curing Time | 25°C X 20G X 2-3h | |
| Hardness | ≥88D | |
| Shelf Life | 6 months |
Product Certification:
EU ROHS Environmental Certification MSDS Export Safety Data Sheet
Application Method:
1. Prepare electronic scales and glue tools.
2. Pour A and B into the rubber mixing container according to the weight ratio and stir them evenly. If there are bubbles, please vacuum.
3. Pour the stirred glue into the product and heat and cure according to the curing conditions.
Note: If the curing volume is large, please test the curing temperature first to prevent air bubbles. The more the amount of curing, the lower the curing temperature in the early stage, and the later curing temperature can be unchanged.
Precautions:
1. Please clearly check the label on the package before matching the glue, and confirm the ratio of the ratio of the A agent to the B agent.
2, the glue tool should be clean and dry, no dust, water and oil
3. Mix the A and B components according to the proportion and stir evenly to avoid unevenness or lack of hardness.
4. Since the glue starts to react and heat, the more the amount of glue is, the more heat is generated, and the curing time is also shortened. The shorter the time that can be used, so please apply the proper amount of glue according to the time of filling. So as not to cause waste.
5. After the glue is finished, seal the AB agent package to prevent debris or moisture absorption, and ensure the normal use of the next time.
6, a very small number of people exposed to the glue for a long time will produce mild skin allergies, it is recommended to wear protective gloves when used, stick to the skin can be wiped off with acetone, Tianna water or alcohol, and cleaned with detergent
7, before mass use, please try a small amount, master the use of the product skills, so as not to make mistakes
Package Storage:
1. Packed for each group of 30KG, A glue 20KG / pot, B glue 10KG / pot
2. After the plastic bucket is opened and the glue is poured out, it needs to be covered immediately to avoid contact with the air for a long time, which causes the glue to oxidize and crystallize.
3, the glue must be sealed and stored in a cool and ventilated place to avoid high temperature or sun exposure
4. The glue may crystallize in the low temperature condition in winter, and it needs to be dissolved in a 60 degree oven before use.
5. The shelf life of this glue is 6 months. If the shelf life is exceeded, please try it in small amount. If it is qualified, you can continue to use it.
PREVIOUS:Stone flat crystal glue, high hardness transparent self-leveling, marble surface countertop glue
NEXT:Stone seamless splicing glue, kitchen countertop sink repair joint waterproof glue
