5 minutes quick-drying glue
5 minutes quick drying type ab glue, epoxy resin glue, high strength waterproof and transparent environmental protection
1, 5 minutes quick-drying glue is a quick-drying adhesive positioning glue for epoxy resin modified series.
2, curing speed, strong adhesion, good transparency, brittle after curing, high hardness, not suitable for bonding PP, soft and other types of materials.
3, 5 minutes quick-drying adhesive passed the EU ROHS environmental protection designation standards.
4, Jiaozhidao specializes in producing all kinds of quick-drying adhesives, which can be customized according to requirements.
Product Parameters:
| Model: | 1008A-5 | 1008B-5 |
| Color: | Transparent viscous body | Transparent liquid |
| Viscosity: | 11000-15000cps | 10000-12000cps |
| Specific: | 1.2g/cm3 | 0.95g/cm3 |
| Shelf life: | 6 months | 6 months |
| Ratio: | A: B = 1: 1 (weight ratio) | |
| Use time: | 25 ° C × 5g ×2minutes | |
| Gel time: | 25° C × 10g × 3minutes | |
| Curing time: | 25° C × 10g × 5-8minutes | |
| Hardeness: | SHORE D≥80 | |
5 minutes quick dry glue application range:
Suitable for rapid positioning and adhesion of metal, ceramic, stone, wood, hard plastic, glass, fiberglass (cloth), carbon fiber (cloth). (More applications, please contact us)
5 minutes quick-drying adhesive sizing method:
1. If it is used for positioning, it only needs a few grams to fix the product on several places.
2. If it is used for bonding, it can be coated with A glue and B glue separately, and then they can be rotated together.
Instructions for use:
1. Please clearly check the label on the package before matching the glue, and confirm the ratio of the ratio of the A agent to the B agent.
2, the glue tool should be clean and dry, no dust, water and oil
3. Mix the A and B components according to the proportion and stir evenly to avoid unevenness or lack of hardness.
4. Since the glue starts to react and heat, the more the amount of glue is, the more heat is generated, and the curing time will be shortened. The shorter the time that can be used, so please apply the proper amount of glue according to the time of filling. So as not to cause waste.
5. After the glue is finished, seal the AB agent package to prevent debris or moisture absorption, and ensure the normal use of the next time.
Packaging and storage precautions:
1. Packed for each group of 2KG, A agent 1KG tank / 5KG barrel, B agent 1KG tank / 5KG barrel
2. After the plastic bucket is opened and the glue is poured out, it needs to be covered immediately to avoid contact with the air for a long time, which causes the glue to oxidize and crystallize.
3, the glue must be sealed and stored in a cool and ventilated place to avoid high temperature or sun exposure
4. The glue may crystallize in the low temperature condition in winter, and it needs to be dissolved in a 60 degree oven before use.
5. The shelf life of this glue is 6 months. If the shelf life is exceeded, please try it in small amount. If it is qualified, you can continue to use it.
6, a very small number of people exposed to glue for a long time will produce mild skin allergies, it is recommended to wear protective gloves when used, stick to the skin can be wiped off with acetone, Tianna water or alcohol, and cleaned with detergent;
7, before mass use, please try a small amount, master the use of the product skills, so as not to make mistakes
PREVIOUS:no article
NEXT:no article
